Replacing A Window Handle Isn't As Difficult As You Think

Tips For Replacing a Window Handle

Changing the handle on your window is a simple task that can be completed in the convenience of your own home. Follow these tips to ensure a smooth and beautiful finish.

Take off the screw covers from your uPVC handle to expose the screws. Make sure you measure the spindle in order to make sure you're getting the correct size replacement.

1. Measure the Spindle length

When replacing a window handle, it's important to determine the dimensions of the spindle correctly. This is because it will determine how tight or loose the handle is and whether it will lock correctly inside the frame of the window. The spindle is the steel shaft that connects to the handle as well as the lock in the frame of the window. The spindle can be found in the standard cross-section of 8mm for industry or the more traditional versions of 9mm. Modern industry standards are 8mm but it wasn't always this way. It is essential to check the measurements when buying a new handle.

Remove the handle. This is done by turning the handle to the open position and unwinding two screws that keep the handle in place (which are often hidden behind plastic caps that are required to be removed). Once the handle has been removed, take a measurement from the base to the point at which it ends. This will give you the measurement needed to purchase a replacement.

There are a variety of options when you are looking to pick the perfect window handle. From sleek chrome that can fit into modern homes to traditional burnished bronze that looks great in restored Georgian rooms, or even the more traditional Tudor cottages with mongoose tails curled. There are many options, but the most important is to select the style that is appropriate to your home.

Espag handles are generally installed to uPVC windows and are identical in size, with 43mm centers (2 fixings). Cockspur handles are available in a variety of sizes, starting at 58mm to 62mm. Cadenza  window handles  have a different size because they have an bent blade that is used to operate an interlocking mechanism that is multi-point inside the window.

Another aspect to consider when selecting a new window handle is knowing which hand you will need to use, which is defined by what hand you use to open the door. Inline window handles aren't handed and can be used on right or left handed windows. Cranked window handles are hand-operated and are only used on windows that open in one direction.

2. Take the handle off

The handle may be damaged or just worn out or simply worn out, a window handle that is shattered can be very frustrating. However, the good part is that replacing the uPVC window handle is a simple job that you can do yourself. All you need are a few basic tools and a bit of time to complete the process.

First of all, you have to open the window and ensure that it is in the unlocked position. Then, remove the screws that hold the handle in place. Once these caps are removed, you can start working on removing the handle itself.

The handle is attached to a spindle in the window frame. It is fixed with screws or pins, depending on the type of handle. The most popular handles are the inline Espagnolette and the cockspur handles. Both of these types of handles are used on casement windows, which includes aluminum windows. You can lock the handles with a key to prevent unauthorised access from the outside. Or you can lock the handles by turning them clockwise.

To remove the handle you will need a flat-bladed screwdriver. Once the clip is released, the handle should slide off the spindle. Once the old handle has been removed, you'll need to determine the length of the spindle and make sure that your new handle will fit.

Once you have the right size, you can now put the new handle in place. It is important to make sure that the new handle is firmly secured and that it is turning the correct way (clockwise for open or counterclockwise for closed). It is also essential to check that it has not been fitted upside down.

Replace the cap screws. After you have completed this step, you can test the handle to make sure it's functioning properly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked position and back.

3. Remove the Screws

A uPVC window handle is a crucial component of every home and is often the first item to exhibit signs of wear and tear or damage. This could be due to natural factors, regular use or even intentional damage by criminals looking to gain access to your home. However, a simple replacement can easily solve the problem and stop the problem from happening again.

UPVC handles can be difficult to open when the locking mechanism isn't functioning properly. Often, the problem can be solved by replacing the multipoint lock instead of the entire handle and it's worthwhile to check this out as it can save you money.

After you've removed the old handle you'll need to remove the screws that were that held it in place. These are typically located on the inside face of the handle base. You may require a screwdriver for this and it's important to not over tighten the screw as this could cause the handle to become loose.

You will then need to locate the fixing screws or pins that keep the new handle in place. Again these are likely to be located on the inside face of the base of the handle and you will need to use an screwdriver or a pair of pliers to take them off them. If you wish to replace them, you should replace the caps on the screw and test the handle to make sure it works properly.

When you're ready to install the new handle, simply align the spindle with the cut-out in the window mechanism and screw it into the right position. Make sure the handle is in the open position and that the screws are secured before replacing the screws' covers, if you wished to do this. After this is done, you're done and can enjoy your newly replaced window handle. We hope this will allow you save money on replacement of your door and window in the future. If you would like assistance in this, or any other aspect of your uPVC windows, don't hesitate to contact us.

4. Install the new handle

The procedure of replacing a damaged window handle or updating it is simple and can be completed within a few easy steps. Identifying the kind of window handle, determining its spindle length and knowing what tools you'll need to finish the job are crucial. Safety is always the top priority when working with windows and tools. Make sure you follow the steps and ensure that you have the right handle to use.

To begin, find the screws that hold your window handle. Remove them while firmly gripping the handle to prevent it from falling and causing an injury. After the screws have been removed, you can put them in a safe place to be replaced in the future.

After removing the old handle, you can begin installing your new handle. The handle should be a perfect fit for it to function properly and hold the window in its closed position. The next step is to slide the metal square at the back of the handle into the hole of your window mechanism, ensuring that it is secure.

The last step is to replace the screws caps and test the handle to ensure that it is working. If you aren't satisfied with the results, or the window doesn't open or close correctly, call our experts for help.

Almost all UK homes are equipped with uPVC Windows. As such, many will need to be changed at some point due to wear and tear or breakage. Anyone with a bit of DIY knowledge can accomplish the task. It is important that the handle you choose is in line with the style and size of the window. If you're unsure about what kind of handle you'll need, feel free to contact our team who will be able to help you navigate the various choices available.